Exit Device Installation in Cypress, TX

Who we help in Cypress

• Retail stores at Cypress Towne Center and along US 290
• Restaurants and bars on Fry Rd, Barker Cypress Rd, and Spring Cypress Rd
• Medical offices, dental clinics, and urgent care facilities
• Schools, daycares, youth centers, and churches across CFISD
• Offices, coworking spaces, and call centers
• Warehouses and light industrial buildings near the Grand Parkway
• Apartments, condos, and HOA clubhouses in Bridgeland, Fairfield, Coles Crossing, and Cypress Creek Lakes
• Fitness centers, salons, and service shops

Do you manage multiple properties? We can standardize hardware across sites and set a maintenance plan that fits your schedule.

What is included in a proper exit device setup

Exit Device Installation is more than hanging a bar on a door. A complete setup includes

• Selecting the right type of device for the door and occupancy
• Correct backset, stile width, and latch configuration
• Reinforcement plates or through bolts for strength
• A compatible strike and proper door prep
• Door closer checks for latching and closing speed
• ADA friendly operation that does not require tight grasping or twisting
• Signage and alarms where required
• Clear egress on the path side of the door

We handle all of it, end to end. That way your exit works cleanly from day one.

Types of exit devices we install

Different doors and uses call for different hardware. We help you choose the right device for your door type, traffic, and code needs.

Rim exit devices

The most common style. The latch sits on the door surface and engages a strike on the frame. Great for single doors and pairs with a mullion. Often used on hollow metal and wood doors.

Mortise exit devices

The latch is a mortise lock body inside the door. Clean look and strong latching. Works well where you need outside trim options or a higher security latch.

Surface vertical rod devices

Top and bottom rods latch into the header and floor. Good for pairs of doors without a center mullion. We make sure the floor and header strikes are anchored well to avoid misalignment.

Concealed vertical rod devices

Rods are hidden inside the door. Cleaner appearance on glass and aluminum doors. Often seen at storefronts. Precise door prep is key here.

Narrow stile panic bars

Built for aluminum glass storefront doors with slim frames. Brands like Adams Rite are common in Cypress shopping centers. We match your door profile for a tight, clean fit.

Fire exit hardware

Used on fire doors that must self latch. These devices meet fire code and do not allow dogging with a hex key. We verify your door’s fire label and fit the right hardware.

Alarmed exit devices

Detex style exit bars sound an alarm if someone opens the door. Useful on back doors to cut down on theft or to keep emergency exits for emergencies.

Electrified exit devices and access control

We install devices that tie into card readers, keypads and keyless entry, and building access control systems. Options include electric latch retraction for scheduled unlocks, request to exit switches, and connections to mag locks or strikes. We coordinate with your access control vendor if needed.

Doors and frames we work on

• Hollow metal doors and frames
• Solid core wood doors
• Aluminum storefront glass doors with narrow stiles
• Glass doors with metal rails
• Pairs of doors with or without a mullion

Not sure what type of door you have at your shop on Telge or Grant Rd? Snap a photo and text it to us. We will identify it and suggest the right hardware.

Our Exit Device Installation process

• Consultation and quote We listen to your needs, check door type, and ask about any inspection notes you received. We confirm occupancy use and whether the door is fire rated. You receive a written quote before we begin.
• Field survey and measurements We measure stile width, backset, door thickness, rail height, and verify swing direction. If your door is part of a pair, we check the sequence so both doors latch as they should.
• Device selection We recommend a model based on traffic, security, code needs, and your budget. We stock popular rim devices and narrow stile bars for same day installs.
• Preparation We mark hole locations with templates, drill clean pilot holes, and use through bolts where needed. For aluminum doors, we add reinforcement plates when required to keep the device solid under heavy use.
• Install and trim We mount the panic bar, fit the strike, install any outside trim like levers or keyed cylinders, then align latching for smooth action.
• Adjust closer and rods We fine tune door closers and vertical rods so the door closes and latches without slamming or bouncing.
• Test and document We test push force, single motion egress, and function with any alarms or access control. You get a brief walk through and operating tips for your team.
• Cleanup and signoff We leave the area clean. You keep your quote and invoice for your records, which helps during inspections.

Have a tight deadline due to a city inspection along Cypress North Houston Rd? Tell us the date. We work fast to keep you on track.

Repair or replace your exit hardware

Not every issue calls for a new device. We repair many problems on the spot.

We repair

• Sticking or dragging push pads
• Latches that will not retract
• Broken or loose end caps
• Misaligned strikes
• Bent or out of sync vertical rods
• Stuck dogging mechanisms
• Weak springs or noisy operation
• Outside lever not engaging the latch

We replace when

• The device is no longer supported by the manufacturer
• The door is fire rated and the device type is not allowed
• The rail is cracked or the latch housing is worn out
• The door stile is damaged from old installs and needs new reinforcement
• You need electrified features your current bar cannot support

Not sure which way to go? We will show you the problem and the options so you can choose what fits your building and budget.

Code and safety essentials in plain language

Safety codes can feel like a maze. Here is the short version of what most Cypress businesses need from exit doors and panic bars

• Free egress. One motion to unlatch. No keys, special knowledge, or tight grasping to exit.
• Proper hardware on doors serving assembly or high occupancy spaces. Panic bars are commonly required there.
• Fire rated doors need fire exit hardware and a self closing closer. No hex key dogging on fire doors.
• Door must latch securely. No wedges, chains, or padlocks across exit doors.
• Clear path to exit. No racks, trash bins, or boxes blocking the door on the inside or outside.
• Proper mounting height. Panic bars are placed within the code range so adults and older kids can reach them.
• ADA friendly force. Push force to release should be reasonable so most people can operate it.

We install with these rules in mind and coordinate with your facility or GC so your hardware matches your use. If your inspector asked for changes, send us the report. We can address each note and document the fix.